Chevy Cobalt Interior Fuse Diagram
The floor console Chevy Cobalt fuse block is located on the passenger side of the floor console behind the forward panel. The panel has three clips. Pull the panel to disconnect the three clips, and access the fuses. Use the fuse puller to remove fuses.
Chevy Cobalt Engine Compartment Fuse Block
Engine Compartment Fuse Block The engine compartment fuse block is located on the driver side of the vehicle. Lift off the cover to check the fuses. See Engine Compartment Overview on page 5-12 of the attached owners manual for more information.
The wiring circuits in your vehicle are protected from short circuits by a combination of fuses, circuit breakers and fusible thermal links. This greatly reduces the chance of damage caused by electrical problems. Look at the silver-colored band inside the fuse. If the band is broken or melted, replace the fuse. Be sure you replace a bad fuse with a new one of the identical size and rating. If you ever have a problem on the road and do not have a spare fuse, you can “borrow” one that has the same amperage. Just pick some feature of your vehicle that you can get along without — like the radio or cigarette lighter — and use its fuse if it is the correct amperage. Replace it as soon as you can. There are two fuse blocks in your vehicle: the floor console fuse block and the engine compartment fuse block. There is one additional fuse located in the back of the vehicle near the battery.